OCCASION MACHINERY FOR OLIVE OIL There are 8 products.

• 
  Available

  PRE-THREADED CAPS SEALING MACHINE 31,5 to 35 mm

  For pre-threaded plugs with a diameter of 31.5 to 35 mm. Simple to use, they close aluminum screw caps previously screwed into the bottle. Available in several models, depending on the diameter of the cap. You can also seal pilfer cap with pourer. All models are equipped with a regulation that allows them to adapt...

  On sale! 294,03 € Ver artículo
• 
  Available

  PRE-THREADED CAPS SEALING MACHINE 23 to 32 mm

  For pre-threaded plugs with a diameter of 23 to 32 mm. Easy to use, they close screw caps of aluminum previously screwed in the bottle. Available in several models, depending on the diameter of the plug. It can also seals pilfer plug with spout. All models are equipped with a regulation that allows them to be...

  On sale! 294,03 € Ver artículo
• 
  Available

  MILL FOR THE CRUSHING OF OLIVE PROD. 400 kg / h

  Simple operation machine, to carry out the crushing of the olive, leaving it prepared for the pressing process. Approximate yield of 400 kg / hour. Hopper, blade, sieve and crushing fall in stainless steel 3-phase single-phase electric motor 220v power

  1 197,90 € Ver artículo
• 
  Available

  MIXER FOR OLIVE PASTE

  This blender is the machine that complements the mill and press equipment. Its function is to accelerate the oil stripping process. It also allows you to obtain extra virgin oil (the one that comes out by itself before starting the pressing) Swivel tank in stainless steel. Single phase electric motor 0.75 hp....

  2 783,00 € Ver artículo
• 
  Available

  OLEUM 50

  It is completely built in Aisi 304 stainless steel: it is made up of an olive oil mill, a mixing tank and a dispenser to deposit the olive paste in the fiscoli.

  4 404,40 € Ver artículo
• 
  Available

  MANUAL HYDRAULIC PRESS WITH MILL AND BLENDER

  Hydraulic press incorporating a mill and motor mixer.- Approximate production of 30 kg / h.- Actuation of the press by means of a manual or motorized hydraulic jack.- Pressure of 350 Bar.- Dish diameter of 270 mm.- Press measurements: 1,500 x 1,000 x 2,500 mm.- Approximate total weight of 160 Kg. (Manual press...

  On sale! 7 434,70 € Ver artículo
• 
  Available

  MOTOR HYDRAULIC PRESS WITH MILL AND BLENDER

  Hydraulic press incorporating a mill and motor mixer.- Approximate production of 30 kg / h.- Actuation of the press by means of a manual or motorized hydraulic jack.- Pressure of 350 Bar.- Dish diameter of 270 mm.- Press measurements: 1,500 x 1,000 x 2,500 mm.- Approximate total weight of 160 Kg. (Manual press...

  On sale! 9 250,45 € Ver artículo
• 
  Available

  VOLUMETRIC DOSER OV MODEL

  Volumetric dosing for filling semi-dense products and liquids in general, able to meet multiple needs in terms of capacity, speed and fill level. The operation is performed through the intervention of a volumetric pump of stainless steel AISI 304. PLC electronic control capable of maintaining the filling rate,...

  On sale! 4 386,98 € Ver artículo